The Xerox WorkCentre 6515/DNI is a color multifunction printer that offers printing, scanning, copying, and faxing capabilities. Here are some key features of the printer:
- Printing: The printer uses Xerox's Hi-Q LED print engine to produce color and black-and-white prints at a resolution of up to 1200 x 2400 dpi. It has a print speed of up to 30 pages per minute (ppm) for both color and black-and-white prints.
- Scanning: The printer has a flatbed scanner with a maximum optical resolution of 600 x 600 dpi, and it also supports scanning from the automatic document feeder (ADF). The ADF can hold up to 50 sheets of paper.
- Copying: The printer can make color and black-and-white copies at a resolution of up to 600 x 600 dpi. It has a copy speed of up to 30 ppm for both color and black-and-white copies.
- Faxing: The printer has a built-in fax modem that supports Super G3 faxing at a speed of up to 33.6 Kbps. It also has a 4 MB fax memory.
- Connectivity: The printer can be connected to a computer via USB, Ethernet, or Wi-Fi. It also supports mobile printing through Apple AirPrint, Google Cloud Print, and Xerox Print Service Plug-in for Android.
- Paper handling: The printer has a 250-sheet paper tray and a 50-sheet bypass tray for specialized media. It can handle paper sizes up to 8.5 x 14 inches (legal size), and it can print on a variety of media types including labels, envelopes, cardstock, and glossy paper.
- Display: The printer has a 5-inch color touchscreen display that makes it easy to navigate menus and settings.
Overall, the Xerox WorkCentre 6515/DNI is a versatile and capable color multifunction printer that would be well-suited for a small or medium-sized office.
How to Reset Xerox WorkCentre 6515/DNI Color Multifunction Printer (Causes and Solutions)
There are several reasons why you might want to reset your Xerox WorkCentre 6515/DNI printer, such as clearing error codes or resetting the printer to its factory settings. Here are some possible causes of issues you might encounter with the printer, and the corresponding solutions to reset it:
- Printer not responding: If your printer is not responding or appears to be stuck, try unplugging it from the power source for a few minutes, then plugging it back in and turning it on again. This can sometimes reset the printer and clear any temporary issues.
- Paper jams: If your printer has a paper jam, first follow the instructions in the user manual to clear it. If the printer is still not functioning properly, you can perform a reset by pressing and holding the power button for at least 10 seconds, until the display turns off. Then release the button and turn the printer on again.
- Error codes: If your printer displays an error code, refer to the user manual to identify the issue and the corresponding solution. If the problem persists, you can try resetting the printer to clear the error code. To do this, press and hold the power button and the Up arrow button simultaneously for at least 10 seconds, until the display turns off. Then release the buttons and turn the printer on again.
- Factory reset: If you want to restore your printer to its factory settings, you can perform a factory reset. This will erase all user settings and configurations. To do this, go to the printer's Control Panel and select the "Machine Status" option. Then select "Tools", and scroll down to "Device Settings". Select "Reset UI to Factory Defaults" and confirm the reset.
Note that performing a factory reset will erase all user settings, including network settings and passwords, so you will need to set them up again after the reset. If you are unsure about any of the steps involved in resetting your Xerox WorkCentre 6515/DNI printer, refer to the user manual or contact Xerox support for assistance.
How to Reset Xerox WorkCentre 6515/DNI Color Multifunction Printer
There are different types of resets that can be performed on the Xerox WorkCentre 6515/DNI printer, depending on the specific issue you are experiencing. Here are the steps to perform some common resets:
Soft reset: This is a simple reset that can be performed when the printer is unresponsive or not functioning properly. To perform a soft reset, follow these steps:
- Press and hold the power button on the printer for at least 10 seconds, until the display turns off.
- Release the button and wait for the printer to turn off completely.
- Turn the printer back on and check if the issue is resolved.
Hard reset: This type of reset is more comprehensive and can help to clear more complex issues. To perform a hard reset, follow these steps:
- Turn off the printer and unplug it from the power source.
- Wait for at least 30 seconds, then plug the printer back in and turn it on.
- When the Xerox logo appears on the display, press and hold the Back arrow button and the Help button simultaneously for about 10 seconds, until the display shows "Beginning Service Mode Initialization".
- Release the buttons and wait for the printer to enter Service Mode.
- Press the Machine Status button, then select "Reset Menu" and confirm the reset.
Factory reset: This is the most comprehensive reset, as it restores the printer to its original factory settings. To perform a factory reset, follow these steps:
- Turn off the printer and unplug it from the power source.
- Press and hold the Back arrow button and the Help button simultaneously, then plug the printer back in while holding the buttons.
- Continue to hold the buttons until the Xerox logo appears on the display, then release them.
- Press the Machine Status button, then select "Tools" and scroll down to "Device Settings".
- Select "Reset UI to Factory Defaults" and confirm the reset.
Note that a factory reset will erase all user settings, including network settings and passwords, so you will need to set them up again after the reset.
If you are unsure about any of the steps involved in resetting your Xerox WorkCentre 6515/DNI printer, refer to the user manual or contact Xerox support for assistance.
How to Reset Xerox WorkCentre 6515/DNI Color Multifunction Printer using Resetter Tools Application
I'm sorry, but there is no official Xerox Resetter Tools application available for the Xerox WorkCentre 6515/DNI printer. Any third-party resetter tools or software are not recommended as they may cause irreversible damage to your printer and void the warranty.
To perform a reset on your Xerox WorkCentre 6515/DNI printer, it is best to follow the manufacturer's recommended reset procedures, such as the soft reset, hard reset, or factory reset, as outlined in the printer's user manual or in my previous response.
If you are experiencing any issues with your printer, you may want to contact Xerox support for assistance or take the printer to an authorized service center for repair. Trying to reset the printer using unauthorized software or tools can cause further damage to the printer and may result in additional repair costs.