How to reset the ink absorber´s counter for Canon Pixma iP4000
To reset the ink absorber counter for your Canon Pixma iP4000 printer, follow these steps:
- Ensure the printer is turned off.
- Press and hold the "Resume" button.
- While holding "Resume," press the "Power" button to turn on the printer.
- Release the "Resume" button and then press it again four times in succession.
- Let go of both buttons; your printer should now enter service mode.
- Tap the "Resume" button twice to access the "Maintenance" menu.
- Confirm your selection by pressing the "Power" button.
- Use the "Resume" button to scroll to "Absorber Counter" and select it by pressing the "Power" button.
- Navigate to "Counter" using the "Resume" button and reset the ink absorber counter by pressing the "Power" button.
- Turn off the printer and then turn it back on to exit the service mode.
Please note that the exact steps may vary depending on your printer's firmware version. Be sure to follow these instructions carefully to avoid any issues.