The Fujifilm ASK-300 Dye-Sublimation Printer is a professional-grade printer designed for high-quality printing of photos and other images. It uses dye-sublimation technology, which involves transferring dye onto a special paper using heat, resulting in vivid, long-lasting prints.
The printer has a print resolution of 300dpi and can produce prints in various sizes, including 3.5 x 5 inches, 4 x 6 inches, 5 x 7 inches, and 6 x 8 inches. It can also print borderless photos, and its printing speed is approximately 11 seconds per print (for a 4 x 6-inch print).
The ASK-300 printer is designed for use in a professional setting, such as photo studios or event photography businesses. It has a robust build and can handle high-volume printing, with a capacity of up to 600 prints per roll of paper.
Overall, the Fujifilm ASK-300 Dye-Sublimation Printer is a reliable and efficient printer that delivers high-quality prints for professional use.
How to Reset Fujifilm ASK-300 Dye-Sublimation Printer (Causes and Solutions)
Resetting the Fujifilm ASK-300 Dye-Sublimation Printer can help resolve a variety of issues, including paper jams, error messages, and other printing errors. Here are the steps to reset the printer:
- Turn off the printer and unplug it from the power source.
- Wait for at least 30 seconds before plugging the printer back in.
- Press and hold the Power button while turning on the printer.
- Keep holding the Power button until the printer starts up and the Fujifilm logo appears on the display.
- Release the Power button.
If the above steps do not resolve the issue, here are some possible causes and solutions:
- Paper Jam - If the printer detects a paper jam, it may need to be reset. Clear the paper jam, and then reset the printer as described above.
- Print Head Error - If the printer detects a print head error, it may need to be reset. Check the print head for any damage or blockages, and then reset the printer.
- Ink Ribbon Error - If the printer detects an ink ribbon error, it may need to be reset. Replace the ink ribbon if it has run out, and then reset the printer.
Overheating - If the printer overheats, it may need to be reset. Turn off the printer and unplug it from the power source for at least 30 minutes to allow it to cool down, and then reset the printer.
In some cases, resetting the printer may not resolve the issue, and you may need to contact Fujifilm technical support for further assistance.
How to Reset Fujifilm ASK-300 Dye-Sublimation Printer using Resetter Tools Application
Resetter tools are software applications used to reset certain printer parameters, such as ink levels or waste ink counters, to allow continued use of the printer beyond its estimated lifespan. These tools are not official software provided by printer manufacturers, and their use may void the printer's warranty.
To use a resetter tool for a printer, follow these general steps:
- Download and install the resetter tool software from a trusted source.
- Connect the printer to the computer using a USB cable.
- Run the resetter tool software and follow the instructions to reset the printer parameters.
- After resetting, disconnect the printer from the computer and turn it off for a few minutes before turning it back on.
It is important to note that the use of resetter tools may not always be successful, and there is a risk of damaging the printer. It is recommended to contact the printer manufacturer or a certified repair center for assistance in resolving any printer issues.